MIMAKI INDIA PRIVATE LIMITED

When the machine is not unused for a long time.

  • If the machine will not be used for a long time (more than one week).

See below about machine care steps (maintenance) if you don’t use the [CJV30 series] for one week or more.

Cleaning the printer at the end of the day is necessary for proper operation. [Custody Wash] is always recommended to clean the ink disposal route and keep it in good condition.

When the machine is not going to be used for a week or more, use [Custody Wash] to clean the head nozzles and ink discharge passage.
Solvent based ink dries rapidly, ink may dry up in the ink disposal route in the machine. Higher ambient temperatures in the Summer accelerate this process. After finishing the work day, cleaning the disposal route will clean the tube and preventing clogging trouble.

When the machine is not going to be used for a week or more, [Custody Wash] is recommended before taking any long holidays.


The below pre-cautions are recommended to follow:

(1) Unused ink cartridges need to be stored at low temperatures, 0℃ to 25℃ (average temperature of a day). Be sure to keep the ink container in an airtight condition if it is removed from the CJV30.
(2) Do not expose the CJV30 to direct sunlight.
(3) Machine should have power and Main Power on (in sleep mode).
(4) Replace ink cartridges with less than 20% ink remaining.
(5) The rear maintenance cleaning cartridge needs to be at least 50% full.
(6) Waste ink tank should be empty.


Return to Content

PAGETOP