MIMAKI INDIA PRIVATE LIMITED

Cut line is out of alignment with the drawing

  • The primary cause for misalignment of the cut and the drawing is expansion and contraction of the media.

Ensure to perform the pre-feed. A roll of paper more or less expands or contracts due to changes in the ambient environment when the taken-up paper becomes slack during cutting. This makes the positional relationship out of alignment at the start and end of cutting or the paper easy to snake or skew.

For details, check on "OPERATION MANUAL ."
The media itself may have been out of alignment. Please see the following.
[Q. Media goes out of alignment ]


Return to Content

PAGETOP