1. Cutting Data with Register Marks

Setting Register Mark Detection Conditions

  1. Press the [FUNCTION] key in local mode.
  1. Press the up jog_down jog_ keys to select [SET UP], then press the [ENTER/HOLD] key.
  • [MARK DETECT] appears on the screen.
  1. Press the [ENTER/HOLD] key.
  • [MARKDETECT: OFF] appears on the screen.
  1. Press the up jog_down jog_ keys to select the number of register marks to be detected, then press the [ENTER/HOLD] key.
  • Settings: OFF, 1pt, 1ptA, 2ptB, 3pt, 4pt
  • Register mark detection is not performed when "OFF" is selected. Press the [END] key several times to exit.
  1. Pressing the [ENTER/HOLD] key toggles through the following items on the display.up jog_down jog_ Use the keys to select the setting, then press the [ENTER/HOLD] key.
  • Scale compensation/Register mark size/Offset A/Offset B/Form of registration mark/Number of continuous cutting in direction A/Number of continuous cutting in direction B/High-speed limit/Skew check/Detect mode/Sensor sensitivity/Filled in register marks/Data ID code
    Notes on Register Mark Detection Setting Items
  1. Press the [END] key several times to exit.
Related Links