2. Cutting Data with Register Marks
3. Detect register marks.

1. Cutting Data with Register Marks

Detect register marks.

Register marks can be detected using either full-automatic or semi-automatic detection.
Detect using semi-automatic detection in cases where TP1 is not at the bottom right of the sheet or when using FineCut/Coat9.

• Curled sheets must be uncurled first.
• If using cutting software that does not include register mark functions, use a sheet free of any images or marks between TP1 and TP2 (A) and between TP1 and TP3 (B).