1. Feed Settings [FEED OPTION]

FEED SPEED Setting

The feed speed can be reduced to reduce the load when using heavier sheets.

  1. Press the [FUNCTION] key in local mode.
  1. Use updown jog_ to select [SET UP], then press the [ENTER/HOLD] key.
  1. Use updown jog_ to select [FEED OPTION], then press the [ENTER/HOLD] key.
  1. Use updown jog_ to select [FEED SPEED], then press the [ENTER/HOLD] key.
  1. Use updown jog_ to select the feed speed, then press the [ENTER/HOLD] key.
  • Setting: 1 to 30 cm/s
  1. Press the [END] key several times to exit.