2. Cutting
3. Installing Tools
4. Using a Pen
5. Installing a (Supply) Ballpoint Pen in the Pen Adapter (SPA-0169)

1. Using a Pen

Installing a (Supply) Ballpoint Pen in the Pen Adapter (SPA-0169)

Use a ballpoint pen with a diameter of 8 to 9 mm. The ballpoint pen type may affect image quality.
Use a ballpoint pen supplied by Mimaki.

1. Put the cap on the pen adapter.

• The cap is used to adjust the height of the pen nib.

2. Insert the ballpoint pen into the pen adapter.

• Insert the pen nib until it hits the cap.

3. Fix the pen nib by turning the knob screw in the direction indicated by the arrow in the picture.

• Be careful to avoid overtightening the knob screw. Disregarding this precaution may damage or break the ballpoint pen.

4. Remove the cap.