1. Using the Cutter

Installing the (Supply) Cutter in the Cutter Holder (SPA-0001)

  1. Loosen the lock nut of the cutter holder and extract the adjusting knob.
  • Turn in the direction indicated by the arrow in the picture.
Cutter installation figure 1
  1. Insert the cutter into the adjusting knob.
  • Use tweezers to insert the cutter.
Cutter installation figure 2
  1. Fix the lock nut by turning in the direction indicated by the arrow in the picture.
Adjustment of blade protrusion figure 3
Related Links