1. Cutting

Cutting Process

  1. Start up host computer (computer on which the cutting software is installed).

  2. Connect host computer to machine.

  3. Using a USB Cable
    Using a LAN Cable
    Using an RS-232C Cable
  4. Turn on the power.

  5. Turning On the Power
  6. Loading a Sheet

  7. Roll sheet or leaf sheet (cut sheet) can be used. Loading a Sheet
    Adjust the pinch roller positions to suit the sheet width. Pinch Rollers and Grit Rollers
  8. Installing Tools

  9. A cutter, ballpoint pen, or creasing tool (option) can be used.
    Installing Tools
  10. Selecting Tool Conditions

  11. Selecting Tool Conditions
  12. Setting Tool Conditions

  13. Set the cutting speed and pressure to match the type of sheet and tools used.
    Setting Tool Conditions
  14. Test Cutting

  15. Perform a test cut to confirm tool conditions are appropriate. Test Cutting
  16. Cut the data.

  17. Cut the data.
  18. Separate sheets.

  19. Cut the sheets manually. Separating Sheets (Manual Cutting)
  20. Turn off machine power.

  21. Turning Off the Power