Register Marks
The following two types of register marks can be used with this machine:
Register mark shape: Type 1 |
Register mark shape: Type 2 |
![](https://d15ouhvlj83qi.cloudfront.net/themes/manual@mimaki/cg-ar-series/operation_manual/en-US/../assets/img/safety-symbols/Hint.png)
- Use mark 4 (TP4) to perform trapezoidal corrections. Mark 4 can be skipped, but doing so will reduce cutting accuracy.
Trapezoidal correction: Corrects any difference in feed rate between left and right edges of the sheet.
Related Links