Outputting Received Data as ASCII Code [DUMP]
Data can be sent from the host computer and printed as ASCII code.
Dumping is possible via an interface to which the host computer is connected.
- Change the tool to a pen.
- Press the [FUNCTION] key in local mode.
- Use
to select [ASCII DUMP], then press the [ENTER/HOLD] key.
- The dump contents cannot be checked directly on a computer.
- To abort dumping, press the [REMOTE] key to switch to local mode, then clear the data. Aborting Cutting (Data Clear)
- When dumping, use sheet detection with rear loading. Note about sheet detection
