Jog Mode Functions

The jog keys can be used to switch from local mode to jog mode.
Jog mode allows the following items to be set or executed.

Function name	Details	Reference page
Origin setting (ORIGIN SET)	Sets the cutting (printing) start position.	Setting the Origin
2-Point line correction (AXIS CORRECT)	Aligns the vertical and horizontal axes of the machine with the vertical and horizontal lines printed on the loaded graph paper.	2-Point Line Correction [AXIS CORRECT]
Cut area setting (CUT AREA)	Sets the cutting (printing) range.	Cut Area Setting [CUT AREA]
Pen up/down	Press the [TOOL] key to move the tool up and down.	-

Check to confirm that no cut (print) data is present before setting functions using jog mode.
If positions such as the origin are specified in jog mode, the center of the tool will coincide with the specified position regardless of whether the LED pointer is on or off.