• Check the condition of the nozzles.

1. There may be a nozzle malfunction (missing or misaligned).
　Please review the test print and refer to the following FAQ if a nozzle malfunction occurs.
　Restore the nozzles to their normal state accordingly.

Q: Nozzle dropout or deflection are not resolved in the test print.

---

---

2. Adjust the head height (head gap) according to the media you are using.
　When the head is too height (resulting in a larger gap between the media and nozzle surface),
　 ink spattering is more likely to occur.
　Unless there is a reason such as media rubbing, please use the head in the lower position.

　Please refer to the "Operation Manual" for adjusting the head height (head gap).

　CJV300(Normal): Operation Manual
　CJV150: Operation Manual

---