MIMAKI INDIA PRIVATE LIMITED

CG-FXII Plus Series

Specifications

 CG-75FXII PlusCG-130FXII PlusCG-160FXII Plus
Acceptable sheet width 90mm~1,040mm (3.54"~40.9") 90mm~1,580mm (3.54"~62.0") 90mm~1,880mm (3.54"~74")
Rolled media weight 18kg (40 lb) or less 22kg (49 lb) or less
Roll outsied diameter φ200mm (7.87") or less
Effective cutting area *1 760mm x 51m (29.9" x 167') 1,300mm x 51m (51.2" x 167') 1,600mm×51m (62.9"×167’)
Maximum auto cutting width *2 870mm (34.2") 1,425mm (56.1") 1,720mm (67.7")
Maximum cutting speed 100cm/s (39.3"/s)
Maximum moving speed 140cm/s (55"/s) (In a 45° direction and in a pen-up state)
Adjustable speed range *3 1-10cm/s : 1cm step adjustment
(0.39"-3.94"/s : 0.39" step adjustment)
10-50cm/s : 5cm step adjustment
(3.94"-19.68"/s : 2" step adjustment)
50-100cm/s : 10cm step adjustment
(19.68"-39.37" : 3.94" step adjustment)
Mechanical resolution 5µm (0.0002")
Command resolution 25μm, 10μm(MGL-IIc), 100μm, 50μm(MGL-Ic1)
Repeatability ±0.2mm (Excluding shrinkage / expansion caused by the film temperature)
Accuracy assurance range (Repeatability) 760mm x 10m (29.9" x 32.8') 1,300mm x 10m (51.2" x 32.8') 1,600mm x 10m (63.0" x 32.8')
Max. pressure 500g
Range of down pressureCutter 10~20g(2g step), 20~100g(5g step), 100~500g(10g step)
Pouncing 10~20g(2g step), 20~100g(5g step), 100~500g(10g step)
Pen 10~20g(2g step), 20~100g(5g step), 100~150g(10g step)
Acceptable sheet *4 Vinyl up to 0.25mm(0.01")thickness,
Fluorescent type vinyl Reflective sheet
Acceptable sheet for pouncing *5 Paper thickness: 0.06~0.13mm (0.0024"~0.005")
Applicable tools *6 Cutter, Water based ball-point pen,
Oil based ball-point pen, Pouncing tool
Certifications VCCI class A, FCC class A, ETL IEC 60950-1
CE Marking (EMC, Low voltage, Machinery directive, and RoHS),
CB, REACH, RCM, EAC
Type of command MGL-II c / I c1
Interface RS-232C, USB
Receiver buffer size 30MB Standard (20MB when in sorting)
Operational environment Temperature: 5~35°C (41~95°F), 35%–75% RH (Non-condensing)
Power requirement AC100V~240V 1A 50/60Hz
Power consumption 100W or less
Dimensions (WxDxH) 1,285mm(50.5")x
700mm(27.5")x
1,217mm(47.9")
1,825mm(71.8")x
700mm(27.5")x
1,217mm(47.9")
2,125mm(83.6")x
700mm(27.5")x
1,217mm(47.9")
Weight (with stands) 47kg (104 lb) 62kg (137 lb) 70kg (154 lb)

*1: Maximum sheet feeding length differs depending on the software.
*2: Sheet width to cut off from the roll.
*3: Restricted sheet width.
*4: Provided that the blade specific to fluorescent type vinyl (SPB-0007) and the blade specific to reflective sheet (SPB-0006) are used.
*5: Pouncing tool intended specifically for pouncing shall be used.
*6: The goods on the market are φ8~φ9 Pen. Accuracy and image quality are not guaranteed.


  • Some of the screens and printing samples in this website are artificial renderings.
  • Specifications are subject to change without notice.
  • All trademarks or registered trademarks are the property of the respective owners.

CG-FXII Plus Series Catalog (4.04MB)pdf file

Model

CG-75FXII Plus Effective cut width: 760 mm (29.9")
CG-130FXII Plus Effective cut width: 1,300 mm (51.2")
CG-160FXII Plus Effective cut width: 1,600 mm (63.0")

Related products

Return to Content

PAGETOP