8-Color multi-head enables switching between 1-way and 2-Way Print Modes
The TX2-1600 employs an 8-Color multi head with the front and rear heads set in a staggered arrangement. The front and rear heads are fed with an independent ink supply system, allowing the selection of 1-way print mode with the same ink type used or 2-way print mode with inks of different types used.
High speed printing realizes high performance
The high speed print head enables 28.4m²/h high speed and 720dpi high quality printing which dramatically increases the potential to deliver digitally printed textiles - from sample creation to small lot production.
*Print Width 1600mm, Bi-Directional
*Print resolution and print speed may be restricted according to the kind of fabric, and the state of a pretreatment.
Head height adjustment mechanism enables printing fabrics up to 7mm thick
Unique Feed Mechanism
The drive roller and friction roller allow a constant tension of fabric, enabling priting to fabrics without any liner sheet (backing sheet). Ink penetrating the fabric is received by the ink trough to allow printing to a coarse-textured fabric. The Fabric Retainer for holding both edges of the fabric prevents contact of the fabric and print head.
* The Fabric Retainer is applicable to up to 5.5mm thickness.
* The ink ditch can be washed with water.
Anti-Meandering Loading Device
Automatic Take-Up Device as Standard
The TX2-1600 is provided with an automatic takeup device as standard which takes up the printed fabric with a constant tenstion, realizing overnight operation and unattended printing. The TX2 is also provided with an additional roll holder for setting a slip sheet that prevents ink penetration.
Easy-to-Use Operation Panel
IEEE1394 port enables high speed communication
|Tx2-1600||Maximum print width: 1,620 mm (63.8")|