MIMAKI INDIA PRIVATE LIMITED

FineCut/Coat9 for CorelDRAW

FineCut/Coat9 for CorelDRAW Ver3.0 (CorelDRAW 2018–2023 (32 bit/64 bit))

Type Software
Version 3.0
Release date 01/19/2024
Supported OS Windows 10
Windows 10 (32bit)
Windows 10 (64bit)
Windows 11
Remarks

CorelDRAW® Graphics Suite 2018/2019/2020/2021/2022/2023 (32 bit/64 bit)
English/German/Italian/French/Portuguese/Spanish/Russian/Simplified Chinese/Traditional Chinese

CorelDRAW® Technical Suite 2018/2019/2020/2021/2022/2023 (32 bit/64 bit)
English/German/French

Supported Software FineCut/Coat9 for CorelDRAW

About this Upgrade software

  • FineCut9 serial key or FineCut/Coat9 serial key is required after software updating.
  • Free upgrade to FineCut/Coat9 from FineCut8 is available if you have FineCut8 CD-ROM.
  • How to issue a FineCut9 serial key from FineCut8 CD-ROM, please see here.

About installer and others

  • When installing RasterLinkTools Ver1.12.0 or less after installing this version, Outline Tools of FineCut/Coat9 may not work properly. Please refer to here to take measure.
  • FineCut/Coat9 can be used in CorelDRAW Graphic Suite 2023 one-time purchase Ver24.4 or later. Refer to here to check the CorelDRAW version.

The following functions have been change

[Ver2.7 -> Ver3.0]

- Improved function -

  1. CFX series is supported.
    • Free Register Marks function
      To improve the accuracy of the alignment of the cuts, register marks can be arranged at any location.
    • V-Cut Tool function
      By cutting the folds with the V-Cut tool, the thick media folds can be sharpened.
    • Edge Detection function
      Detects the edge of the work and corrects the cut position and tilt. When a register mark is detected and cut the object from the back surface, it can be cut without using the mark tip by using the edge detection together.
    • Teaching Register Marks function
      By using a camera eqipped to CFX and specifying the register mark position by Teaching, you can accurately cut the outline of printed materials with other manufactures' register mark.

[Ver2.6 -> Ver2.7]

- Improved function -

  1. UCJV330 series is supported.

-Fixed bugs -

  1. Mimaki Driver can be installed when installing FineCut, but you cannot install it in the Windows 11 environment because of the older version.

[Ver2.4 -> Ver2.6]

- Improved function -

  1. CorelDRAW Graphics / Technical Suite 2023 is supported.
    When using one-time purchase verision, use CorelDRAW Graphics Suite 2023 Ver24.4 or later.

[Ver2.3 -> Ver2.4]

- Improved function -

  1. Mimaki Register marks SDK is supported.
    Register marks which created based on the Mimaki Register marks SDK with third party software can be recognized by FineCut.
  2. CorelDRAW Graphics / Technical Suite 2022 is supported.

[Ver2.2 -> Ver2.3]

- Improved function -

  1. CG-AR series is supported.
    With the division cutting function, cut misalignment due to sheet meandering can be suppressed.
  2. CJV330 series is supported.

[Ver2.1 -> Ver2.2]

- Improved function -

  1. CorelDRAW Technical Suite 2021 is supported.
  2. Windows 11 is now supported.
    * Camera for Gravotech laser is not supported.

-Fixed bugs -

  1. When the cut data is created using the following functions, it is printed by RasterLink5.
    Frame Extraction / Outline Tool / Move to the Cut Layer / Register Mark Creation [Leave a rectangle as the cutting line].

[Ver2.0 -> Ver2.1]

- Fixed bugs -

  1. The arrow to specify the cut direction deviates from the design.

[Ver1.6 -> Ver2.0]

- Improved function -

  1. The product name has been changed.
    FineCut9 -> FineCut/Coat9

[Ver1.4 -> Ver1.6]

- Improved function -

  1. CorelDRAW Graphics Suite 2021 is now supported.

-Fixed bugs -

  1. Origin is shifted when Origin Lock is ON and move object by using Direct Select Tool.
  2. When outputting ID cut without register marks, the print and the cut line are out of alignment.
  3. Even if EPS option or Adobe PDF save dialog is canceled with ID cut, the cut command is outputted.

[Ver1.3 -> Ver1.4]

- Improved function -

  1. CorelDRAW 2020 is now supporeted.

-Fixed bugs -

  1. The new information of FineCut9 can be acquired through the online information from this version.

[Ver1.1 -> Ver1.3]

- Improved function -

  1. Camera for Gravotech laser is now supporeted.
    • The register marks are detected by the cameraautomatically to output.
    • The new function can be used only by the Gravotech laser model with camera.

-Fixed bugs -

  1. In some models, wrong value was displayed as a recommended register mark size in FineCut. The wrong value has been corrected.
  2. The output condition setting function by each color and layer for CF3 (M head) can be now used.
  3. When register marks were recognized during CF3 (M head), the cut preview display was misaligned. The problem has been improved.

[Ver1.0 -> Ver1.1]

- Improved function -

  1. CJV300 Plus is supported.
  2. CG-FXⅡPlus is supported.

New functions of FineCut/Coat9

  1. It can be now outputted directly to Trotec Speedy 100/300/360/400.
    It can be outputted by the procedure that outputs to Mimaki plotter.
    Register mark cut can be done by manually adjusting the RED pointer of the laser machine to the printed register mark.
  2. It can be now outputted directly to Gravotech LS series.
    (Gravotech driver installation is required.)

    It can be outputted by procedure that outputs to Mimaki plotter.
    Register mark cut can be done by manually adjusting the RED pointer of the laser machine to the printed register mark.
  3. CJV300 Plus is supported.
  4. CG-FXII Plus is supported.

For Gravotech LS series users

Please download the driver from this Gravotech's site and install it according to the manual of the same site.

About manuals

Download from here.

Precautions for download

Be sure to read the following license agreement before downloading this software.

Software License Agreement

By installing this software, you agree to be bound by this agreement.

Article 1 Definition
  1. Software means the computer program supplied with this agreement.
  2. Related data means printed text data supplied with this software or printed data which we may supply subsequently.
  3. This software means the software, related data and the copy of this software which we supply to you.
Article 2 Limitations
  1. This software must not be copied against the provisions of this agreement.
  2. This software must not be changed or reverse engineered. Moreover, it must not be transferred, leased or sublicensed to the third party. The status of this agreement must not be transferred, either.
  3. This software must not be transferred, licensed or resold to the third party or transferred, licensed or purchased from it by rental or false rental activity.
  4. This software must not be transferred or licensed to the third party or purchased from it as secondhand goods.
Article 3 Limitation of Warranty
  1. It is not warranted that functions contained in this software suit the intended use of the customer.
  2. This software should be selected and introduced in the customer’s responsibility: any damage in installing this software in the computer’s hard disk and the plotter’s memory is not covered.
  3. We accept no responsibility for any results of the use of this software (including lost earnings or profits).
Article 4 Term of Validity
  1. The term of validity of this agreement starts when the customer installs this software.
  2. When the customer decides to stop using this software, this agreement is automatically terminated.
  3. This agreement is terminated immediately, without our notice, if the customer does not follow any clause of this agreement. If this agreement terminates, the whole of this software must be deleted.
Download FC930CD.exe(441.33MB)

Return back to list

Return to Content

PAGETOP