Specifications

UJ330H-160
Print Head		On-demand piezo head (2 staggered layout)
Print resolution		Y : 600, 1,200 dpi, X : 600, 900, 1,200, 1,800 dpi
Head gap		Automatic nozzle-to-media distance adjustment 1.5 mm to 3.0 mm (in 0.1 mm increments), automatically adjusted by belt elevation.
Ink	Type/Color	ELS-170 / ELS-175*1: C,M,Y,K,Lc,Lm,W,Cl LUS-210*1: C,M,Y,K,W
	Capacity	1L bottle
Maximum print width		1,610 mm (63.4")
Media (Roll)	Size	Width: 210 ~ 1,620 mm (8.3 ~ 63.8")
	Roll diameter	φ250 mm (9.8") or less
	Roll weight	45 kg (99 lb) or less
	Roll inside diameter	2 inch / 3 inch
	Take-Up Torque Limiter	Standard Setting: Low (adjustable from Low to High)
Media (Rigid)	Size	Width: 210 ~ 1,620 mm (8.3 ~ 63.8") Length: 280 mm ~ 2,500 mm (11" ~ 98.4")
	Thickness	50.8 mm (2") or less
	Weight	25 kg (55.1 lb) or less（7 kg (15.4 lb)/m² or less）
Automatic Adjustment		DAS2 Equipped
Interface		Ethernet 1000 BASE-T (Recommended), USB2.0 Hi-Speed
Certifications		VCCI class A, FCC class A, ETL IEC 62368-1, CE Marking (EMC, Low voltage, Machinery directive, and RoHS), CB, REACH, Energy Star, RCM, EAC, KC, UKCA
Power supply		Single phase AC100-120V±10% /8A or Single phase AC200-240V±10% /4A, 50/60±1Hz x2
Power consumption		800W x2 (Maximum), Inlet1 400W / Inlet2 500W (Average running), 4.5W or less x2 (Standby)
Operational environment		Temperature: 20–30 °C (68–86 °F) Humidity: 35–65% Rh (Non condensing) Recommended temperature: 20–25 °C (68–77 °F) Dust level: General office level
Dimensions (W×D×H) *2		Main unit: 3,225 x 785 x 1,420 mm (126.9 x 30.9 x 55.9") Main unit + 1 Roller table set: 3,225 x 2,664 x 1,420 mm (126.9 x 104.9 x 55.9") Main unit + 2 Roller table set: 3,225 x 4,712 x 1,420 mm (126.9 x 185.5 x 55.9")
Weight *2		Main unit: 386 kg (851 lb) Main unit + 1 Roller table set: 498 kg (1097.9 lb) Main unit + 2 Roller table set: 610 kg (1344.8 lb)

*1 ELS-175 and LUS-210 are an ink sold in specific countries and regions.
*2 One set of Roller table contains two units.

Ink set

ELS-170 ［C,M,Y,K,Lc,Lm,W,Cl］	C　M　Y　K
	C　M　Y　K　Lc　Lm　W
	C　M　Y　K　W　Cl
ELS-175 ［C,M,Y,K,Lc,Lm,W,Cl］	C　M　Y　K
	C　M　Y　K　Lc　Lm　W
	C　M　Y　K　W　Cl
LUS-210 ［C,M,Y,K,W］	C　M　Y　K
	C　M　Y　K　W

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

---

---

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---