Specifications

JFX600-2531
Head		On-demand Piezo head 16 printheads (4x4 lines in a staggered layout)
Print resolution		600, 1,200dpi
Ink	Type	Flexible UV curable ink : LUS-120 (C, M, Y, K, Lc, Lm, W, Cl) *1
		Flexible UV curable ink : LUS-150 (C, M, Y, K, Lc, Lm, W) *1
		Flexible UV curable ink : LUS-211 (C, M, Y, K, W, Cl) *1 *2
		Hard UV curable ink : LH-100 (C, M, Y, K, Lc, Lm, W, Cl)
		Primer: PR-200 *3
	Ink Supply system	Supplied from 1-liter bottles for each color
	Ink circulation system *4	White ink circulation using Mimaki Circulation Technology (MCT)
Maximum diagram dimensions (W×D)		2,500×3,100 mm (98.4×122.0")
Media	Dimensions (W×D)	Up to 2,500×3,100 mm (98.4×122.0")
	Height	Max. 60 mm
	Weight	Less than 50 kg/m2 (110.2 lb./ft2), non concentrated load
Media absorption		Blower adsorption type + foot switch
Number of absorption area partitions		9 partitions (X-axis direction)
Curing device		LED-UV system
Interface		Ethernet 10GBASE-T
Safety standard		UL 62368 ETL / CE Marking (EMC, Machinery directive, and RoHS) / REACH / RCM / KC / UKCA
Power supply		(Single phase, AC200-240V±10%, 50/60Hz±1Hz, 24 A) ×3
Power consumption		INLET1 to 3 | Each INLET: Less than 4.8 kVA
Installation environment	Temperature	20 – 30 °C (68 – 86 °F)
	Relative humidity	35 - 65％Rh (Non condensing)
	Accuracy maintained temperature	20 – 25 °C (68 – 77 °F)
	Temperature gradient	Less than ± 10 °C/h (± 18 °F/h)
	Dust	Similar to standard office environments
Assembled Dimensions (W×D×H)		Approx. 5,400×5,600×1,700 mm (212.6×220.5×66.9") or less
Weight		Approx. 1,500 kg (3,306.9 lbs.) or less

*1 Stretchability of each stretchable ink may vary depending on materials, please test on actual materials in advance.
*2 LUS-211 ink is available in some regions.
*3 PR-200 is not compatible to use with LUS-211.
*4 MCT works only with white ink.
・Inks would not be cured when printing speed is faster than that of draft mode.

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

---

---

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---