Specifications

		CG-60AR	CG-100AR	CG-130AR
Acceptable sheet width		90 - 740 mm (3.5 - 29.1")	90 - 1,250 mm (3.5 - 49.2")	90 - 1,550 mm (3.5 - 61.0")
Effective cutting area *1		606 mm × 51 M (23.9" x 167.3')	1,070 mm × 51 M (42.1" x 167.3')	1,370 mm × 51 M (53.9" x 167.3')
Maximum speed		Cutting: 73 cm/s (28.7"/s), Moving at 45° direction: 103 cm/s (40.5"/s)
Adjustable speed range		1 - 10 cm/s (1 cm/s step adjustment): 0.4 - 3.9"/s (0.4"/s step adjustment) 10 - 73 cm/s (5 cm/s step adjustment): 4.0 - 28.7"/s (2.0"/s step adjustment)
Mechanical resolution		X direction: 2.5 μm, Y direction: 5 μm
Command resolution		25 μm, 10μm（MGL-IIc） / 100 μm, 50 μm（MGL-Ic1）
Repeatability *2		± 0.2 mm / 2 M
Effective Repeatability		586 mm × 2 M	1,050 mm × 2 M	1,350 mm × 2 M
Maximum pressure		550g
Range of down pressure	Cutter	10 - 20 g (2 g step), 20 - 100 g (5 g step), 100 - 550g (10g step)
	Pen	10 - 20 g (2 g step), 20 - 100 g (5 g step), 100 - 150g (10 g step)
	Creasing tool	10 - 20 g (2 g step), 20 - 100 g (5 g step), 100 - 550g (10g step)
Acceptable sheet *3*4		Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet and Cardboard (used in combination with an optional sheet table)
Acceptable tool *5		Eccentric cutter, Creasing tool, commercially available ball-point pen
Type of command		MGL-IIc / MGL-Ic1
Interface		USB, RS-232C, Ethernet
Receiver buffer size		About 27 MB as standard (17 MB when sorting is effective)
Operational environment		Temperature: 5 - 35 degC (41 - 95 degF), Humidity: 35 - 75 ％ Rh (Non-condensing)
Power supply		AC 100 V - 240 V 1A 50/60Hz
Power consumption		168W or less	228W or less
Dimensions（W×D×H）		1,010 × 355 × 355 mm (39.8 × 14.0 × 14.0") 1,010 × 580 × 1,160 mm *6 (39.8 × 22.8 × 45.7") *6	1,510 × 580 × 1,160 mm (59.4 × 22.8 × 45.7")	1,810 × 580 × 1,160 mm (71.3 × 22.8 × 45.7")
Weight		17kg (37.5 lb) 27kg (59.5 lb) *6	35kg (77.2 lb)	43kg (94.8 lb)
Stand		Options	Standard equipment

*1: Maximum sheet feeding length differs depending on the software.
*2: For detailed conditions of repetition accuracy, please refer to the instruction manual.
*3: For fluorescent and reflective sheets, use the blade dedicated to each material.
*4: Thick cardboard may reduce cut quality and precision.
*5: Use a commercially available ball-point pen with dia. 8-9 mm and without protrusion nor taper on the clamp position.
*6: When equipped with the optional stand.

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice (for technical improvements, etc).
• All trademarks or registered trademarks are the property of their respective owners.

---