Specifications

UJF-7151 plusII e
Printhead		On-demand piezo head (8 staggered printheads)
Print resolution		600 dpi / 900 dpi / 1200 dpi / 1800 dpi
Maximum printable area		710 × 510 mm (28 × 20 in)
Ink	Type/Color *	LH-100 (C, M, Y, K, Lc, Lm, W, Cl) ELH-100 (C, M, Y, K, Lc, Lm, W, Cl) MUH-100-Si (Si) LUS-120 (C, M, Y, K, Lc, Lm, W, Cl) ELS-120 (C, M, Y, K, Lc, Lm, W, Cl) LUS-350 (C, M, Y, K, W, Cl) PR-200 (Primer)
	Package size	200ml bottle (MUH-100-Si) 250ml bottle (LH-100, ELH-100, LUS-120, ELS-120, PR-200) 1L bottle (LH-100, ELH-100, LUS-120, ELS-120, LUS-350, PR-200)
Media	Size	730 × 530 mm (28.7 × 20.9 in) or smaller
	Height	153 mm (6 in) or less
	Weight	30 kg (66 lb) or less
Certifications		VCCI class A, FCC class A, ETL IEC 62368-1, CE Marking (EMC, Low voltage, Machinery directive, and RoHS), CB, REACH, EAC, RCM
Interface		USB 2.0 / Ethernet 1000 BASE-T
Power supply		Single phase AC100-120/200-240V±10％, 50/60Hz±1Hz
Power consumption		1.3 kW or less
Operational environment	Temperature	15 - 30 degC (59 - 86 degF)
	Humidity	35 - 65％Rh (Non condensing)
	Recomended Temperature	20 - 25 degC (68 - 77 degF)
	Temperature change	±10 degC (±50 degF) /h or less
	Dust level	Equivalent to a general office floor level
Dimensions (W × D × H)		2,203 × 1,572 × 1,293mm / 87 × 62 × 51 in
Weight		330 kg / 728 lb (including dedicated base)

*ELH-100 and ELS-120 are SVHC-free inks. SVHC-free ink is ink that does not contain SVHC and CMR, chemical substances that are considered to pose extremely high concerns for human health and the environment.

・Inks would not be cured when printing speed is faster than that of draft mode.

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

---

---

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---