Specifications

Tx500P-3200DS
Printhead		On-demand piezo printhead 12 printheads arrangement in three staggered lines
Print resolutions		X: 360dpi, 540dpi, 720 dpi, 1,080dpi / Y: 540dpi, 720 dpi
Maximum print width		3,290 mm (129.5 in)
Maximum media width		3,300 mm (129.9 in)
Built-in fixation heater	Temperature	Standard: 180 degC (356 degF) Maximum temperature: 200 degC (392 degF) Temperature fluctuation: ±5 degC (±41 degF)
	Transportation/ Heating method	Vertical non-contact heating system
Ink	Type/color	Sb320/ Bl, M, Y, K, Lbl, Lm
	Package size	2 L bottle *Large ink containers (3 L) are installed in the ink supply unit
	Ink set	4-color: Bl, M, Y, K 6-color: Bl, M, Y, K, Lbl, Lm
RIP software		TxLink3 Standard, RasterLink6
Media thickness		1.0 mm or less
Roll weight		130 kg (286.6 lb) or less
Roll outer diameter		φ300 mm (11.8 in) or less
Interface		Printing data : Ethernet 1000BASE-T (recommended)* / USB2.0 Hi-speed Mail function : Ethernet 10BASE-T / 100BASE-TX / 1000BASE-T
Certifications		VCCI class A / FCC class / UL 775 compliance / CE Marking（EMC, Machinery directive, and RoHS) / REACH
Power supply		Main unit: Single-phase AC200 - 240V±10%, 50/60Hz±1Hz, 29A or less Fixation heater: Three-phase: AC200V±10%, 50/60Hz±1Hz, 125A or less
Power consumption		Main unit: 7 kVA or less Fixation heater: 50 kVA or less (When using 200V)
Operational environment	Temperature	20 - 30 degC (68 - 86 degF)
	Humidity	35 - 65 %Rh (non-condensing)
	Recomended Temperature	20 - 25 degC (68 - 77 degF)
	Temperature change	±10 degC (50 degF)/h or less
	Dust level	0.15mg/m2 or less (Equivalent to a general office floor level)
Dimensions (W × D × H)		Main unit: 5,620 mm × 3,050 mm × 1,820 mm (221.3 in × 120.1 in × 71.7 in) Ink supply unit: 960 mm × 510 mm × 730 mm (37.8 in × 20.1 in × 28.7 in) Inverter: 910 mm × 600 mm × 1,240 mm (35.8 in × 23.6 in × 48.8 in)
Weight		Main unit: 2,390 kg (5,269 lb) Ink supply unit: 30 kg (66.1 lb), Inverter: 140 kg (308.6lb)

* We recommend Ethernet connection for optimum usage due to high processing speed of the printer. In the case of USB 2.0 connection, printing speed may be slow.

Ink set

Sb320 ［Bl,M,Y,K,Lbl,Lm］	Bl　M　Y　K
	Bl　M　Y　K　Lbl　Lm

• Some of the samples in this website are artificial renderings.
• Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
• The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
• Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.
• Depending on image files used for printing, the print quality would be affected when printing in a low-resolution mode with the lowest number of passes.

---