MIMAKI INDIA PRIVATE LIMITED

UJF-7151 plusII

Specifications

UJF-7151 plusII
Printhead On-demand piezo head (8 staggered printheads)
Printing resolution 1800 dpi maximum
Maximum printable area 710 × 510 mm (28 × 20 in)
InkType/Color LH-100 (C, M, Y, K, Lc, Lm, W, Cl)
MUH-100-Si (Si)
LUS-120 (C, M, Y, K, Lc, Lm, W, Cl)
LUS-350 (C, M, Y, K, W, Cl)
PR-200 (Primer)
Package size 200ml bottle (MUH-100-Si)
250ml bottle (LH-100, LUS-120, PR-200)
1L bottle (LH-100, LUS-120, LUS-350, PR-200)
MediaSize 730 × 530 mm (28.7 × 20.9 in) or smaller
Height 153 mm (6 in) or less
Weight 30 kg (66 lb) or less
Certifications VCCI class A, FCC class A, ETL IEC 62368-1,
CE Marking (EMC, Low voltage, Machinery directive, and RoHS),
CB, REACH
Interface USB 2.0 / Ethernet
Power supply Single phase AC100-240V +6%/-10% 50/60Hz ± 1Hz
Power consumption Less than 1.3 kVA
Operational environmentTemperature15 - 30 degC (59 - 86 degF)
Humidity35 - 65%Rh (Non condensing)
Recomended
Temperature
20 - 25 degC (68 - 77 degF)
Temperature
change
±10 degC (±50 degF) /h or less
Dust levelEquivalent to a general office floor level
Dimensions (W × D × H) 2,203 × 1,572 × 1,293mm / 87 × 62 × 51 inch
Weight 330 kg / 728 lb (including dedicated base)

・Inks would not be cured when printing speed is faster than that of draft mode.

  • Some of the screens and printing samples in this website are artificial renderings.
  • Specifications are subject to change without notice.
  • All trademarks or registered trademarks are the property of their respective owners.
  • Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.



Precautions for UV printing

Inks and substrates:

  • Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
  • Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

  • Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
  • Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
  • In addition, please read the instructions and guidelines of the manual carefully and follow those.

UJF-7151 plusII Catalog (1.13MB)pdf file

Model

UJF-7151 plusII Maximum print area: 710 x 510 mm (28 x 20")

Related products

Return to Content

PAGETOP